The UEE50220 Diploma of Electrical and Instrumentation provides students with comprehensive knowledge and skills in instrumentation, PID Controlers, HMI’s, Control Valves, PLC programming, microcontrollers and specification writing.
.
Accredited Course
Flexible delivery – online or face to face or mixed
Emphasis on Practical Component
Small groups
Extensive presentations/videos for online learning (click here for example).
State of the art equipment
Course Overview
This qualification covers competencies to develop, select, install, commission, maintain and diagnose faults/malfunctions on electrical, instrumentation and control equipment and systems.
Duration
Our flexible delivery allows students to progress at their own pace, therefore the duration will vary with experience and capabilities of different students.
The recommended duration of this qualification is 213h, for students that need to complete all the 17 core units + 3 elective units that are part of this qualification.
Students that have a Certificate III in Instrumentation and Control (UEE31220 or UEE31211) will have Credit transfer to 13 units, so they will only need to complete a total of 7 units.
Students that have a Cert. IV in Electrical Instrumentation (UEE40220 or UEE40411) + a Certificate III in Instrumentation and Control (UEE31220 or UEE31211) will have Credit transfer to 13 units, so they will only need to complete a total of 3 units.
Delivery
This course consists of two parts:
- Theory delivery and assessments - The theory delivery and assessments can be done online with trainer support.
- Practical delivery and assessessments - The practial delivery and assessments are to be done on campus, except for a few units that can be completed online. If upgrading from Cert.III in Instrumentation and Control, all practicals can be done online.
Contact us to know more about our flexible delivery, Credit Transfers and how we can help you.
Location
Our classes will take place at our Brisbane Campus at Suite 6, 28 Old Cleveland Road, Stones Corner, Brisbane, QLD.
Remote Classes in Sydney take place at 46 Edward Street, Summer Hill (subject to confirmation).
For other locations, please Contact us. We are available to take our training to where is needed (conditions apply - a minimum number of students is needed for remote classes).
This qualification covers competencies to develop, select, install, commission, maintain and diagnose faults/malfunctions on electrical, instrumentation and control equipment and systems.
Duration
Our flexible delivery allows students to progress at their own pace, therefore the duration will vary with experience and capabilities of different students.
The recommended duration of this qualification is 213h, for students that need to complete all the 17 core units + 3 elective units that are part of this qualification.
Students that have a Certificate III in Instrumentation and Control (UEE31220 or UEE31211) will have Credit transfer to 13 units, so they will only need to complete a total of 7 units.
Students that have a Cert. IV in Electrical Instrumentation (UEE40220 or UEE40411) + a Certificate III in Instrumentation and Control (UEE31220 or UEE31211) will have Credit transfer to 13 units, so they will only need to complete a total of 3 units.
Delivery
This course consists of two parts:
- Theory delivery and assessments - The theory delivery and assessments can be done online with trainer support.
- Practical delivery and assessessments - The practial delivery and assessments are to be done on campus, except for a few units that can be completed online. If upgrading from Cert.III in Instrumentation and Control, all practicals can be done online.
Contact us to know more about our flexible delivery, Credit Transfers and how we can help you.
Location
Our classes will take place at our Brisbane Campus at Suite 6, 28 Old Cleveland Road, Stones Corner, Brisbane, QLD.
Remote Classes in Sydney take place at 46 Edward Street, Summer Hill (subject to confirmation).
For other locations, please Contact us. We are available to take our training to where is needed (conditions apply - a minimum number of students is needed for remote classes).
Course Outline
This course provides comprehensive knowledge and skills in Instrumentation, PID Controlers, HMI's, Control Valves and PLC programming. It is made up of 18 core units and 2 elective units of competency.
For the students that have already completed a Cert. IV in Electrical Instrumentation (UEE40420), 10 units can be credit transferred, leaving a total of 9 core units and 1 elective units to be completed.
For the students that have already completed a Cert. III in l Instrumentation and Control (UEE31220), 14 units can be credit transferred, leaving a total of 5 core units and 1 elective units to be completed.
For the students that have already completed a Cert. III in l Instrumentation and Control (UEE31220) + Cert. IV in Electrical Instrumentation (UEE40420), 17 units can be credit transferred, leaving a total of 2 core units and 1 elective units to be completed.
The table below shows the list of units to be completed as part of the Diploma of Electrical Instrumentation. The units highlighted in red are the units that are credit transferred from the Cert.III in instrumentation and control and the ones in blue are the ones credit transferred from the Cert. IV in Electrical Instrumentation.
This course provides comprehensive knowledge and skills in Instrumentation, PID Controlers, HMI's, Control Valves and PLC programming. It is made up of 18 core units and 2 elective units of competency.
For the students that have already completed a Cert. IV in Electrical Instrumentation (UEE40420), 10 units can be credit transferred, leaving a total of 9 core units and 1 elective units to be completed.
For the students that have already completed a Cert. III in l Instrumentation and Control (UEE31220), 14 units can be credit transferred, leaving a total of 5 core units and 1 elective units to be completed.
For the students that have already completed a Cert. III in l Instrumentation and Control (UEE31220) + Cert. IV in Electrical Instrumentation (UEE40420), 17 units can be credit transferred, leaving a total of 2 core units and 1 elective units to be completed.
The table below shows the list of units to be completed as part of the Diploma of Electrical Instrumentation. The units highlighted in red are the units that are credit transferred from the Cert.III in instrumentation and control and the ones in blue are the ones credit transferred from the Cert. IV in Electrical Instrumentation.
| Core Units |
|---|
| UEECD010 - Compile and produce an energy sector detailed report |
| UEECD0024 - Implement and monitor energy sector WHS policies and procedures |
| UEECD0027 - Participate in development and follow a personal competency development plan |
| UEEIC0038 - Solve problems in density/level measurement components and systems |
| UEEIC0039 - Solve problems in flow measurement components and systems |
| UEEIC0041 - Solve problems in pressure measurement components and systems |
| UEEIC0043 - Solve problems in temperature measurement components and systems |
| UEEIC0047 - Use instrumentation drawings, specifications, standards and equipment manuals |
| UEEIC0013 - Develop, enter and verify discrete control programs for programmable controllers |
| UEEIC0021 - Find and rectify faults in process final control elements |
| UEEIC0022 - Install instrumentation and control apparatus and associated equipment |
| UEEIC0023 - Install instrumentation and control cabling and tubing |
| UEEIC0029 - Set up and adjust PID control loops |
| UEEIC0030 - Set up and adjust advanced PID process control loops |
| UEEIC0031 - Set up and configure human-machine interface (HMI) and industrial networks |
| UEEIC0048 - Verify compliance and functionality of instrumentation and control installations |
| UEERE0013 - Develop strategies to address environmental and sustainability issues in the energy sector |
| UEECD0060 - Write specifications for electrotechnology engineering projects |
| Elective Units Group C (Choose 1) |
| UEEIC0015 - Develop, enter and verify word and analogue control programs for programmable logic controllers |
| UEEIC0026 - Provide solutions to fluid circuit operations |
| Elective Units Group D |
| UEEIC0010 - Develop and test code for microcontroller devices |
Cost
$2,500 (GST Free)* - Upgrade from Cert III in instrumentation and Control + Cert. IV in Electrical Instrumentation (total of 3 units).
$8,000 (GST Free) - Full Qualification from Electrical licence (total of 20 units)
Contact us for latest promotional prices.
Contact us for funding options.
**Prices are for upskilling from UEE40411/UEE40420 and UEE31211/31220. For older qualifications extra fees may occur, as there may be extra units that need to be completed.
$2,500 (GST Free)* - Upgrade from Cert III in instrumentation and Control + Cert. IV in Electrical Instrumentation (total of 3 units).
$8,000 (GST Free) - Full Qualification from Electrical licence (total of 20 units)
Contact us for latest promotional prices.
Contact us for funding options.
**Prices are for upskilling from UEE40411/UEE40420 and UEE31211/31220. For older qualifications extra fees may occur, as there may be extra units that need to be completed.
Additional Information
For more additional information download the Qualification Brochure here.
For more additional information download the Qualification Brochure here.