The UEE51020 Diploma of Instrumentation and Control Engineering provides students with comprehensive knowledge and skills in Instrumentation, PID Controlers, HMI’s, Control Valves, PLC Programming, Microcontrollers, Specification Writing, Phyton Programming and Embedded Controller Design.
.
Accredited Course
Flexible delivery – online or face to face or mixed
Emphasis on Practical Component
Small groups
Extensive presentations/videos for online learning (click here for example).
State of the art equipment
Course Overview
This qualification covers competencies to select, install, set up, test, fault find, repair, maintain and commission systems and devices for measurement and recording of physical/chemical phenomenon and related process control systems.
Duration
Our flexible delivery allows students to progress at their own pace, therefore the duration will vary with experience and capabilities of different students.
The recommended duration of this qualification is 352h, for students that need to complete all the 28 core units + 7 elective units that are part of this qualification. From these, 6 of the core units can be credit transferred from the Australian Electrical Licence.
Additionally, students that have a Cert. IV in Electrical instrumentation (UEE40420 or 40411) are eligible for Credit Transfer for 10 more core units, having to complete only a total of 19 units. For those who also have a Cert.III in Instrumentation and Control (UEE31220 or 30211), 11 more units can be credit transferred, leaving a total of 8 units to be completed.
Delivery
This course consists of two parts:
- Theory delivery and assessments - The theory delivery and assessments are to be done online with trainer support.
- Practical delivery and assessessments - The practial delivery and assessmentsneed to be done on campus.
Contact us to know more about our flexible delivery, Credit Transfers and how we can help you.
Location
Our classes will take place at our Brisbane Campus at Suite 6, 28 Old Cleveland Road, Stones Corner, Brisbane, QLD.
Remote Classes in Sydney take place at 46 Edward Street, Summer Hill (subject to confirmation).
For other locations, please Contact us. We are available to take our training to where is needed (conditions apply - a minimum number of students is needed for remote classes).
This qualification covers competencies to select, install, set up, test, fault find, repair, maintain and commission systems and devices for measurement and recording of physical/chemical phenomenon and related process control systems.
Duration
Our flexible delivery allows students to progress at their own pace, therefore the duration will vary with experience and capabilities of different students.
The recommended duration of this qualification is 352h, for students that need to complete all the 28 core units + 7 elective units that are part of this qualification. From these, 6 of the core units can be credit transferred from the Australian Electrical Licence.
Additionally, students that have a Cert. IV in Electrical instrumentation (UEE40420 or 40411) are eligible for Credit Transfer for 10 more core units, having to complete only a total of 19 units. For those who also have a Cert.III in Instrumentation and Control (UEE31220 or 30211), 11 more units can be credit transferred, leaving a total of 8 units to be completed.
Delivery
This course consists of two parts:
- Theory delivery and assessments - The theory delivery and assessments are to be done online with trainer support.
- Practical delivery and assessessments - The practial delivery and assessmentsneed to be done on campus.
Contact us to know more about our flexible delivery, Credit Transfers and how we can help you.
Location
Our classes will take place at our Brisbane Campus at Suite 6, 28 Old Cleveland Road, Stones Corner, Brisbane, QLD.
Remote Classes in Sydney take place at 46 Edward Street, Summer Hill (subject to confirmation).
For other locations, please Contact us. We are available to take our training to where is needed (conditions apply - a minimum number of students is needed for remote classes).
Course Outline
This course provides comprehensive knowledge and skills in Instrumentation, PID Controlers, HMI's, SCADA, Fluid circuits, Control Valves, PLC programming and Quality Systems. It is made up of 28 core units + 7 elective units that are part of this qualification. From these, 6 of the core units can be credit transferred from the Australian Electrical Licence.
Additionally, students that have a Cert. IV in Electrical instrumentation (UEE40420 or 40411) are eligible for Credit Transfer for 10 more core units, having to complete only a total of 19 units. For those who also have a Cert.III in Instrumentation and Control (UEE31220 or 30211), 10 more units can be credit transferred, leaving a total of 8 units to be completed.
The table below shows the list of units to be completed as part of the Diploma in Instrumentation and Control Engineering. The units highlighted in green are credit transferred from the electrical licence. The units highlighted in blue can be credit transferred from the Cert. IV in Electrical Instrumentation and the units in red are the ones that can be credit transferred from the Cert. III in Instrumentation and Control.
This course provides comprehensive knowledge and skills in Instrumentation, PID Controlers, HMI's, SCADA, Fluid circuits, Control Valves, PLC programming and Quality Systems. It is made up of 28 core units + 7 elective units that are part of this qualification. From these, 6 of the core units can be credit transferred from the Australian Electrical Licence.
Additionally, students that have a Cert. IV in Electrical instrumentation (UEE40420 or 40411) are eligible for Credit Transfer for 10 more core units, having to complete only a total of 19 units. For those who also have a Cert.III in Instrumentation and Control (UEE31220 or 30211), 10 more units can be credit transferred, leaving a total of 8 units to be completed.
The table below shows the list of units to be completed as part of the Diploma in Instrumentation and Control Engineering. The units highlighted in green are credit transferred from the electrical licence. The units highlighted in blue can be credit transferred from the Cert. IV in Electrical Instrumentation and the units in red are the ones that can be credit transferred from the Cert. III in Instrumentation and Control.
| Core Units |
|---|
| UEECD0007 - Apply work health and safety regulations, codes and practices in the workplace |
| UEECD0016 - Document and apply measures to control WHS risks associated with electrotechnology work |
| UEECD0019 - Fabricate, assemble and dismantle utilities industry components |
| UEECD0020 - Fix and secure electrotechnology equipment |
| UEECD0043 - Solve problems in direct current circuits |
| UEECD0051 - Use drawings, diagrams, schedules, standards, codes and specifications |
| UEECD010 * - Compile and produce an energy sector detailed report |
| UEECD0024* - Implement and monitor energy sector WHS policies and procedures |
| UEECD0027* - Participate in development and follow a personal competency development plan |
| UEEIC0038 - Solve problems in density/level measurement components and systems |
| UEEIC0039 - Solve problems in flow measurement components and systems |
| UEEIC0041 - Solve problems in pressure measurement components and systems |
| UEEIC0043 - Solve problems in temperature measurement components and systems |
| UEEIC0047 - Use instrumentation drawings, specifications, standards and equipment manuals |
| UEEIC0013 - Develop, enter and verify discrete control programs for programmable controllers |
| UEERL0004 - Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring |
| UEECD0045 - Solve problems in multiple path extra-low voltage (ELV) a.c. circuits |
| UEEIC0021 - Find and rectify faults in process final control elements |
| UEEIC0022 - Install instrumentation and control apparatus and associated equipment |
| UEEIC0023 - Install instrumentation and control cabling and tubing |
| UEEIC0029 - Set up and adjust PID control loops |
| UEEIC0030 - Set up and adjust advanced PID process control loops |
| UEEIC0031 - Set up and configure human-machine interface (HMI) and industrial networks |
| UEEIC0048 - Verify compliance and functionality of instrumentation and control installations |
| UEERE0013 - Develop strategies to address environmental and sustainability issues in the energy sector |
| UEECD0055 - Write specifications for industrial electronics and control projects |
| UEEIC0018 - Diagnose and rectify faults in digital controls systems |
| UEEIC0020 - Fault find and repair analogue circuits and components in electronic control systems |
| Elective Units Group C |
| UEEIC0015 - Develop, enter and verify word and analogue control programs for programmable logic controllers |
| UEEIC0004 - Calibrate, adjust and test measuring instruments |
| UEECS0033 - Use engineering applications software on personal computers |
| UEEIC0010 - Develop and test code for microcontroller devices |
| UEEIC0014 - Develop, enter and verify programs in supervisory control and data acquisition systems |
| UEECS0012 - Design embedded controller control systems |
| UEECS0019 - Develop, implement and test object-oriented code |
Cost
$15,000 (GST Free) - Full Qualification
$13,000 (GST Free) - Upgrade from electrical licence
$9,600 (GST Free) - Upgrade from Cert. IV in Electrical instrumentation (UEE40420 or 40411)
$6,100 (GST Free) - Upgrade from Cert. IV in Electrical instrumentation (UEE40420 or 40411) + Cert.III in Instrumentation and Control (UEE31220 or 30211)
Contact us for latest promotional prices.
Contact us for funding options.
* For older qualifications extra fees may occur, as there may be extra units that need to be completed.
$15,000 (GST Free) - Full Qualification
$13,000 (GST Free) - Upgrade from electrical licence
$9,600 (GST Free) - Upgrade from Cert. IV in Electrical instrumentation (UEE40420 or 40411)
$6,100 (GST Free) - Upgrade from Cert. IV in Electrical instrumentation (UEE40420 or 40411) + Cert.III in Instrumentation and Control (UEE31220 or 30211)
Contact us for latest promotional prices.
Contact us for funding options.
* For older qualifications extra fees may occur, as there may be extra units that need to be completed.
Additional Information
For more additional information download the Qualification Brochure here.
For more additional information download the Qualification Brochure here.